There are numerous sorts of toilets, and when choosing, it’s vital to consider the genuine conditions in your domestic to decide which measure is most fitting. Underneath, I’ll examine the measurements of toilets.
Toilet Dimensions：
1、Overall Dimensions
For tank-type toilets, the ordinary length is around 700 mm, the stature is around 700 mm, and the width ranges from 300 to 500 mm.
For one-piece toilets, the stature from the beat to the foot is around 750 to 830 mm, the tallness of the situate is around 360 to 430 mm, and the width is approximately 680 to 730 mm.
For children’s toilets, the measurements are roughly 530 mm in length, 285 mm in width, and 500 mm in height.
For shrewd toilets, the tallness is around 700 mm, the length ranges from 620 to 720 mm, and the width is generally between 360 to 400 mm, with widths of 370 to 380 mm being very common.
If it’s a wall-hung latrine, its measurements are roughly 650 mm in length, 345 mm in stature, and 740 mm in width.
2、Seat Height
The situate stature is ordinarily around 400 mm, which gives a comfortable sitting position. The situate stature is measured from the least surface to the situate itself, and most of the measurements are based on human stature. Taller people may lean toward a higher can.
3、Rough-In Measurement
The rough-in measurement depends on the outlet strategy. The rough-in for level outlets is ordinarily around 180 mm, whereas for floor outlets, it can be around 380 mm, 400 mm, or 580 mm, etc. When measuring the rough-in for an unfinished room, be beyond any doubt to subtract the measurements that will be possessed by tiling the divider.
In summary：the measurements of toilets can change altogether. It’s fundamental to consider different viewpoints when deciding the measure, so you’ll know the correct measurements required. Some time recently obtaining, be beyond any doubt to get it the measurements designated in your domestic to select the most reasonable measure. I trust this data is accommodating to everybody.