When installing a toilet, it is necessary to apply silicone sealant at the bottom for sealing to prevent water leaks. So, how long should you wait after applying silicone before flushing the toilet?
I. Recommended waiting time after applying silicone:
If you use neutral silicone, you can flush the toilet after 1 day. If you use acidic silicone, it should be waited for 2 days before flushing. This is because silicone is wet and soft when first applied and requires 1-2 days to dry and cure to achieve an effective seal. Flushing the toilet before this time may lead to leaks and unpleasant odors.
II. When using silicone on the toilet, take these precautions:
- Prior to beginning, make sure you buy the right silicone for your needs and carefully read the instructions to ensure you follow the mixing and application instructions.
- If you have a tiled floor, silicone is a better option for sealing than cement because cement can eventually cause cracking or other problems near the toilet.
- Clear the joint’s surface of any moisture, oil, or debris before applying. To make sure it is dust-free, you can use a cleaner for this purpose and then wipe it with a fresh cloth.
- To guarantee correct contact with the base when applying silicone with a caulking gun, squeeze the sealant at the joint from a 45-degree angle. It might be necessary to use more than one application if the joint width is greater than 15 mm. Next, peel off the tape and use a knife to scrape off extra sealant.
- Do not go to the bathroom right away after finishing the application. Waiting until the silicone is completely cured, which usually takes two days, is advised.
Synopsis
The waiting period following silicone application to the toilet and crucial safety measures have been discussed in this article. Please keep checking our website for updates and more information; we’ll be adding more interesting content soon.